Engineering plastics tank towline Nylon Cable Drag Chain

Brief introduction of Cable Drag Chain

The cable chain is assembled by single unit, each unit can be disassembled easily by the flat screwdriver, welcome ask us for installation video!

For the same series, they have the same height and pitch, but the width and bending radius can be different, please contact our sales to get fast help on choosing size.

When the length of the cable chain is more than 7meters per piece, pls add support roller or guide channel.

Guide for type selection of cable Drag Chain

Material: steel cable chain, stainless steel cable chain, nylon cable chain

Function: single row type, compound rows type, enclosed type,anti-noise type Environment:oil/rain/salt/humidity/rubbish/high-TEMP/low-TEMP/load-bearing/long travel range/low noise~

Assembly:Unitary type,bridge type, semi enclosed type,total enclosed type.

Plastic silent tow chain selection:

Inner height: Select the thickest one of the embedded cables, tubing, bronchus, water pipes, etc., as the reference height, plus at least 10% of the height of the indoor space as the inner height of the plastic silent drag chain. If the superposition is taken as the reference height according to the specific height after the overlap.

Inner width: Select some thicker cables, tubing, bronchus, water pipes, etc., the sum of their diameters is used as a reference for the inner width of the plastic silent drag chain, and leave at least 10% of the total width of the indoor space.

Bending radius: Select the highest bending radius of embedded cables, tubing, bronchi, water pipes, etc., as the standard value, and leave more than 10% of the indoor space, plastic silent drag chain embedded cables, tubing, water pipes, bronchi placement standards.

15% of the excess indoor space should be set aside, so that the embedded cable, tubing, etc., can move freely, and the plastic silent drag chain does not form a tensile force on the half direction.

Power lines with large diameter gaps should be separated and paved, and the net weight is evenly spread, and can be separated with spacers when necessary.

In the case of fast or high frequency operation, it is necessary to separate the power lines from each other in terms of capacity as much as possible, and it is not necessary to juxtapose them, and it is proposed to apply spacers in the case of cables, bronchus, tubing, etc.