Connectors for 3D Printer

Cable carriers, also known as drag chains, energy chains, or cable chains depending on the manufacturer, are guides designed to surround and guide flexible cables and hydraulic or pneumatic hoses connected to moving automated machinery. They reduce wear and stress on cables and hoses, prevent entanglement, and improve operator safety.

When the Plastic Drag Chain encounters problems, it can be eliminated by the following methods:

1, parameter inspection method: when the failure should be timely check the system parameters, parameters are generally stored in the bubble memory or stored in the CMOS RAM that needs to be kept by the battery, once the battery is insufficient or due to external interference and other factors, the individual parameters of the plastic Drag Chain are lost or changed, chaos occurs, so that the machine tool can not work normally. In this case, you can check and modify the parameters to remove the fault.

2, visual inspection method: This method is the first method used by maintenance personnel, that is, when the fault diagnosis, from the outside to the inside one by one observation inspection. What should be noted is whether there is a missing piece phenomenon.

3, the test exchange method: that is, in the case of analyzing the approximate cause of the fault, the maintenance personnel can use the spare printed circuit board, integrated circuit chip or component to replace the doubtful part, so as to narrow the fault range of the plastic drag chain to the printed circuit board or chip level.

4, functional testing method: functional program testing method is the numerical control system G, M, S, T, F function with programming method into a functional test program, and stored in the corresponding media, such as paper tape and tape. Running this program during the fault diagnosis of the plastic tow chain can quickly determine the possible cause of the fault.

Our products are excellent, welcome to purchase